Do grease guns have different fittings?

Do grease guns have different fittings?

Do grease guns have different fittings?

A grease gun may come with the standard connection adapter such as a hydraulic coupler, but there are several variations depending on the application. The standard hydraulic coupler is the most commonly used and most applicable. A 90-degree adapter is ideal for fittings in confined areas that require a 90-degree bend.

Are grease Zerks a standard size?

The most common standard grease fitting size is 1/4"‑28 SAE‑LT and is often used in automotive applications. They can also be found in agricultural environments as well as other various standard duty applications. For heavy duty applications, larger 1/8"‑27 PTF zerk fittings can be found.

Are grease fittings universal?

Grease fittings come in many different styles. There are two grease fittings that are very common. ... However, there are other less common grease fitting threads in use.

Are Zerk fittings standard?

Zerk Fitting Standards. Our zerk fittings meet or exceed all commercial standards, and conform with the following: SAE Specification J-5343. Military Specification F-3541.

What are the different types of grease fittings?

There are three major thread types for grease fittings: metric, taper or parallel, and unified. M5, M6, M7, M8, and M10 are common metric threads. British standard pipe (BSP), pipe thread fine (PTF), and national pipe thread fine (NPTF) fittings use tapered or parallel threads.

Are grease fittings metric?

Metric Grease Fittings are available in both regular and stainless steel. Metric Grease Fittings are also referred to as Metric Zerk Fittings, Metric Lubrication Fittings, Metric Hydraulic Fittings, and Metric Zerks.

What is standard grease gun cartridge size?

14-ounce Amazon.com: COREGEAR CG321 Standard Lever Grease Gun, 14-ounce Cartridge : Automotive.

How are grease Zerks measured?

0:102:05The trick to tell grease zerks apart - YouTubeYouTube

Are Zerk fittings universal?

Zerk Fittings may be all the same But I have Had Many that would either NOT Go On or had a Heck of a Time Getting it Off.

What is a drive type grease fitting?

Drive Type Grease Fittings are designed for fast production line installation in untapped holes to avoid thread tapping costs. ... Drive Type Grease Fittings have a serrated shank, which facilitates the substitution of damaged grease fittings in old or oversize holes.

Is it a ZERT or a Zerk?

  • Both are correct, but two different parts. A zerk is a grease fitting. A zert is a nut zert. it is a threaded insert that is usually installed like a rivet into a frame rail or any place that you can not get a nut on the back side. once compressed it will expand and hold tight to allow you to bolt something down.

What is Zerk fitting this?

  • A grease fitting, grease nipple, Zerk fitting, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, into a bearing under moderate to high pressure using a grease gun. 1 Design.

What are the sizes of Grease fittings?

  • There are two grease fittings that are very common. These are the 1/4″-28 thread and the 1/8″ NPT thread. However, there are other less common grease fitting threads in use.

Is this a grease zerk?

  • Grease zerks are used to lubricate mechanical parts which require grease. A spring-loaded ball inside the grease zerk compresses when pressure is applied with a grease gun and allows grease to flow through the fitting into the application the grease zerk is installed. After pressure from the grease gun is released the spring-loaded ball check returns to the head of the grease zerk and stops dirt and other contaminants from entering the grease zerk as well as preventing grease from escaping ...

Related Posts: